System windows: Difference between revisions
Christophe (talk | contribs) No edit summary |
Christophe (talk | contribs) No edit summary |
||
Line 22: | Line 22: | ||
[http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=375775&lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=375773 here]. I choose the PS drivers, but I am not sure if it is better to choose PCL5 (or PCL6). | [http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=375775&lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=375773 here]. I choose the PS drivers, but I am not sure if it is better to choose PCL5 (or PCL6). | ||
Once the driver is installed, you might do a few modifications: | |||
Go to: "Start" -> "settings" -> "Printers and faxes", make it default (right click) | |||
look at the properties (right click) | |||
Go to "device settings" and look for the "duplex unit" option: make it installed so that you can automatically print on both sides. | |||
Et voila! Now you can print some pretty good things :) | Et voila! Now you can print some pretty good things :) |
Revision as of 01:25, 21 August 2007
Printing configuration
Go to: "Start" -> "settings" -> "Printers and faxes"
Choose "Add printer"
Choose "Local printer attached to this computer" (uncheck the "automatically detect and install..."
Choose "create a new port" and choose "Standar TCP/IP Port"
You will then have to specify the IP addresse: 172.23.213.43
The port name should be automaticcaly IP_172.23.213.43 but you probably can change it
Select "generic network card" and "next"
Then you have to specify the drivers:
choose the Manufacturer: "HP" and the Printer: "HP color Laser Jet 4650"
I didn't find "HP color Laser Jet 4650" on my computer so I had to download the correct driver on the HP website here. I choose the PS drivers, but I am not sure if it is better to choose PCL5 (or PCL6).
Once the driver is installed, you might do a few modifications:
Go to: "Start" -> "settings" -> "Printers and faxes", make it default (right click)
look at the properties (right click) Go to "device settings" and look for the "duplex unit" option: make it installed so that you can automatically print on both sides. Et voila! Now you can print some pretty good things :)